Production, characterization and performance of green geopolymer modified with industrial by-products.

Industrial by-products; have received a lot of attention as a possible precursor for cement and/or concrete production for a more environmentally and economically sound use of raw materials and energy sources. Geopolymer is a potentially useful porous material for OPC binder applications. The use of industrial wastes to produce a greener geopolymer is one area of fascinating research. In this work, geopolymer pastes were developed using alkali liquid as an activator and metakaolin (MK), alumina powder (AP), silica fume (SF), and cement kin dust (CKD) as industrial by-products. Several geopolymer samples have been developed. Research has been carried out on its processing and related physical and mechanical properties through deep microstructure investigation. The samples were cured in water by immersion with relative humidity (95 ± 5%), and at room temperature (~ 19-23 °C) prior to being tested for its workability and durability. The effect of the different composition of precursors on water absorption, density, porosity, and the compressive strength of the prepared geopolymers have been investigated. The results showed that the compressive strength of geopolymers at 28 days of curing is directly proportional to the ratio of the alkali liquid. Ultimately, the best geopolymer paste mixture (GPD1 and GPD2), was confirmed to contain (15% of CKD + 85% MK and Alumina solution (55 wt%)) and (25% of CKD + 75% MK + Alumina solution (55 wt%)) respectively, with 73% desirability for maximum water absorption (~ 44%) and compressive strength (4.9 MPa).

Green and sustainable synthesis of CaO nanoparticles: Its solicitation as a sensor material and electrochemical detection of urea.

Urea is recognized as one of the most frequently used adulterants in milk to enhance artificial protein content, and whiteness. Drinking milk having high urea concentrations which causes innumerable health disputes like ulcers, indigestion, and kidney-related problems. Therefore, herein, a simple and rapid electroanalytical platform was developed to detect the presence of urea in milk using a modified electrode sensor. Calcium oxide nanoparticles (CaO NPs) were green synthesized and used as a catalyst material for developing the sensor. Synthesized materials formation was confirmed by different techniques like FTIR, UV-visible, XRD, SEM-EDX, and Raman spectroscopy. The carbon paste electrode (CPE) was modified using the CaO NPs and used as a working electrode during the analysis followed by cyclic voltammetry and differential pulse voltammetry (DPV) techniques. The fabricated calcium oxide modified carbon paste electrode (CaO/CPE) successfully detected the presence of urea in the lower concentration range (lower limit of detection (LLOD) = 0.032 µM) having a wide linear detection range of 10-150 µM. Adsorption-controlled electrode process was achieved at the scan rate variation parameter. The leading parameters like the selectivity, repeatability, and stability of the CaO/CPE were investigated. The relative standard deviation of sensor was ± 3.8% during the interference and stability study.

Effective voltammetric tool for Nano-detection of triazine herbicide (1-Chloro-3-ethylamino-5-isopropylamino-2,4,6-triazine) by naphthalene derivative.

The development and operation of a nanosensor for detecting the poisonous 1-chloro-3-ethylamino-5-isopropylamino-2,4,6-triazine (Atrazine) are described in this study for the first time. The carbon electrode (CE) surface was modified with cysteine-substituted naphthalene diimide to create this sensitive platform. The developed nanosensor (NDI-cys/GCE) was evaluated for its ability to sense Atrazine using differential pulse voltammetry and cyclic voltammetry. To achieve the best response from the target analyte, the effects of several parameters were examined to optimize the conditions. The cysteine-substituted naphthalene diimide significantly improved the signals of the Atrazine compared to bare GCE due to the synergistic activity of substituted naphthalene diimide and cysteine molecules. Under optimal conditions, atrazine detection limits at the (NDI-cys/GCE) were reported to be 94 nM with a linear range of 10-100 µM. The developed sensing platform also showed positive results when used to detect the atrazine herbicide in real tap water, wastewater, and milk samples. Furthermore, a reasonable recovery rate for real-time studies, repeatability, and stability revealed that the developed electrochemical platform could be used for sample analysis.

Valorification of Egyptian volcanic tuff as eco-sustainable blended cementitious materials.

Rhyolite rocks extend from southern Egypt to northern Egypt in the Eastern Desert, and no effective economic exploitation of them has been discovered so far. The pozzolanic activities of different volcanic tuffs (VT) supplied from the Eastern Desert located in Egypt have been investigated as natural volcanic pozzolan materials to develop new green cementitious materials for achieving sustainability goals in the construction field. Experimentally in this paper, the pozzolanic activities of seven diverse specimens of Egyptian tuffs taken with standardized proportions of 75:25% (Cement: volcanic tuffs) were investigated. Pozzolanic features of such tuffs are examined comparatively via strength activity index (SAI), TGA, DTA, and the Frattini's test. Chemical composition, petrographic, and XRD analysis were also performed for tuffs samples. The pozzolanic reaction degrees were determined according to the compressive strengths at 7, 28, 60 and 90 days with different replacement ratios (20, 25, 30 and 40%) of tuffs samples. Additionally, the micro-filler effects in mortar and concrete were determined by measuring the heat of hydration in mortar samples and the compressive strength of concrete with different additive ratios for tuffs samples besides, the concrete slump test. The results show that TF6 gives a lower cement heat of hydration value which is less than 270 J/g at 7 days. Also, its performance in concrete is better than silica fume at late strength (28 days) since the concrete index value is 106.2% by compared to the concrete index of silica fume 103.9 and therefore it can be used as an alternative to high price and quality variable silica fume (SF) for producing high-performance green concrete. Due to the good pozzolanic behavior proved by nearly most volcanic tuffs, along with their low cost, this study will be profitable for very auspicious the use of Egyptian volcanic tuffs for developing sustainable and eco­friendly blended cement.

Persistence and remote sensing of agri-food wastes in the environment: Current state and perspectives.

Food demand is expected to increase globally by 60-110% from 2005 to 2050 due to diet shifts and population growth. This growth in food demand leads to the generation of enormous agri-food wastes (AFWs), which could be classified into pre-consumption and post-consumption. The AFW represents economic losses for all stakeholders along food supply chains, including consumers. It is reported that the direct financial, social, and environmental costs of food waste are 1, 0.9, and 0.7 trillion USD/year, respectively. Diverse conventional AFW management approaches are employed at the different life cycle levels (entre supply chain). The review indicates that inadequate transportation, erroneous packaging, improper storage, losses during processing, contamination, issues with handling, and expiry dates are the main reason for the generation of AFWs in the supply chain. Further, various variables such as cultural, societal, personal, and behavioral factors contribute to the AFW generation. The selection of a specific valorization technology is based on multiple physicochemical and biological parameters. Furthermore, other factors like heterogeneity of the AFWs, preferable energy carriers, by-products management, cost, end-usage applications, and environmental legislative and disposal processes also play a crucial role in adopting suitable technology. Valorization of AFW could significantly impact both economy and the environment. AFWs have been widely investigated for the development of engineered added-value biomaterials and renewable energy production. Considering this, this study has been carried out to highlight the significance of AFW cost, aggregation, quantification, and membrane-based strategies for its management. The study also explored the satellite remote sensing data for Spatio-temporal monitoring, mapping, optimization, and management of AFW management. Along with this, the study also explained the most recent strategies for AFW valorization and outlined the detailed policy recommendation along with opportunities and challenges. The review suggested that AFW should be managed using a triple-bottom-line strategy (economic, social, and environmental sustainability).

Membrane-based water and wastewater treatment technologies: Issues, current trends, challenges, and role in achieving sustainable development goals, and circular economy.

Membrane-based technologies are recently being considered as effective methods for conventional water and wastewater remediation processes to achieve the increasing demands for clean water and minimize the negative environmental effects. Although there are numerous merits of such technologies, some major challenges like high capital and operating costs . This study first focuses on reporting the current membrane-based technologies, i.e., nanofiltration, ultrafiltration, microfiltration, and forward- and reverse-osmosis membranes. The second part of this study deeply discusses the contributions of membrane-based technologies in achieving the sustainable development goals (SDGs) stated by the United Nations (UNs) in 2015 followed by their role in the circular economy. In brief, the membrane based processes directly impact 15 out of 17 SDGs which are SDG1, 2, 3, 5, 6, 7, 8, 9, 11, 12, 13, 14, 15, 16 and 17. However, the merits, challenges, efficiencies, operating conditions, and applications are considered as the basis for evaluating such technologies in sustainable development, circular economy, and future development.

Role of microalgae in achieving sustainable development goals and circular economy.

In 2015, the United Nations General Assembly (UNGA) set out 17 Sustainable Development Goals (SDGs) to be achieved by 2030. These goals highlight key objectives that must be addressed. Each target focuses on a unique perspective crucial to meeting these goals. Social, political, and economic issues are addressed to comprehensively review the main issues combating climate change and creating sustainable and environmentally friendly industries, jobs, and communities. Several mechanisms that involve judicious use of biological entities are among instruments that are being explored to achieve the targets of SDGs. Microalgae have an increasing interest in various sectors, including; renewable energy, food, environmental management, water purification, and the production of chemicals such as biofertilizers, cosmetics, and healthcare products. The significance of microalgae also arises from their tendency to consume CO2, which is the main greenhouse gas and the major contributor to the climate change. This work discusses the roles of microalgae in achieving the various SDGs. Moreover, this work elaborates on the contribution of microalgae to the circular economy. It was found that the microalgae contribute to all the 17th SDGs, where they directly contribute to 9th of the SDGs and indirectly contribute to the rest. The major contribution of the Microalgae is clear in SDG-6 "Clean water and sanitation", SDG-7 "Affordable and clean energy", and SDG-13 "Climate action". Furthermore, it was found that Microalgae have a significant contribution to the circular economy.

Hexamethylenetetramine functionalized graphene oxide-alginate beads nanocomposite as efficient sorbent for dye from aqueous solution.

In this study, a novel eco-friendly sorbent, hexamethylenetetramine (HMTA) functionalized calcium alginate (AG) immobilized graphene oxide (GO) composite (AG-GO-HMTA) and hexamethylenetetramine functionalized calcium alginate composite (AG-HMTA) were prepared. Adsorption factors including pH impact, contact time, initial dye concentration, dosage, selectivity and reusability on methylene blue (MB) removal from water were investigated. The prepared sorbents were characterized using structural (e.g. XRD, FT-IR, EDAX), thermal (e.g. TGA, DTG), and morphological (e.g. SEM, BET) analysis techniques. The equilibrium adsorption data was described by the Langmuir and Freundlich isotherms, and the adsorption kinetic and thermodynamic parameters were investigated. The field studies and regeneration of the beads were investigated. AG-GO HMTA displays a well-defined porous structure and this desired morphology arising from high quality dispersion of HMTA within the AG-GO matrix. The highest adsorption capacities were observed at pH âˆ¼ 5, meanwhile the adsorption of MB dye molecules, positively charged, onto the beads became faster due to strong electrostatic interactions. When the value of dosage is 0.01 g, the equilibrium concentration (mg/g) are maximum at 103, 110, 164, 168 mg/g for AG, AG-GO, AG-HMTA and AG-GO-HMTA, respectively. The present work shows that pseudo first order could describe the MB adsorption onto AG while it couldn't describe the MB adsorption onto the functionalized sorbents due to the hybrid materials complicity.

Ecological effects, remediation, distribution, and sensing techniques of chromium.

Chromium is detected in most ecosystems due to the increased anthropogenic activities in addition to that developed from natural pollution. Chromium contamination in the food chain results due to its persistent and non-degradable nature. The release of chromium in the ecosystem accretes and thereafter impacts different life forms, including humans, aquatic and terrestrial organisms. Leaching of chromium into the ground and surface water triggers several health ailments, such as dermatitis, eczematous skin, allergic reactions, mucous and skin membrane ulcerations, allergic asthmatic reactions, bronchial carcinoma and gastroenteritis. Physiological and biological treatments for the removal of chromium have been discussed in depth in the present communication. Adsorption and biological treatment methods are proven to be alternatives to chemical removal techniques in terms of cost-effectiveness and low sludge formation. Chromium sensing is an alternative approach for regular monitoring of chromium in different water bodies. This review intended to explore different classes of sensors for chromium monitoring. However, the spectrochemical methods are more sensitive in chromium ions sensing than electrochemical methods. Future study should focus on miniaturization for portability and on-site measurements without requiring a large instrument provides a good aspect for future research.

Economic and facile approach for synthesis of graphene-titanate nanocomposite for water reclamation.

Graphene and its composites with semiconductor materials have been received highly attention in many research areas because of their unique properties. Efficient application of graphene is hindered by the lack of cost-effective synthesis methods. In this work, an economic and facile route for mass production of graphene-titanate nanocomposite has been discussed. Graphene was prepared by exfoliation of graphite powder in 40% ethanol aqueous solution. Titanate nanotubes were grown on graphene sheets by hydrothermal method, where the dispersed graphene sheets were mixed with titanate solution and then placed in autoclave and placed in oven for 16 h at 160 °C. The prepared composite was characterized by transmission electron microscope (TEM), scanning electron microscope (SEM), Fourier transforms infrared spectroscopy (FTIR), thermogravimetric analysis (TGA). All the obtained results confirmed the synthesis of graphene and its composite with titanate in highly uniform and pure form. The adsorption efficiency of the prepared composite was tested using methylene blue (MB) as a model dye. The adsorption isotherm was investigated using Freundlich and Langmuir models. The adsorption capacity of MB was 270.27 mg/g. The obtained correlation coefficients (R2) by Freundlich and Langmuir model were 0.996 and 0.973, respectively. The adsorption kinetics was investigated and discussed using different models. The thermal stability of the developed composite is improved after MB adsorption.

Geopolymer concrete as green building materials: Recent applications, sustainable development and circular economy potentials.

Environmental degradation and increased greenhouse gas emissions force communities to achieve sustainable green building and construction materials. The environmental and financial aspects of sustainable development and circular economy strongly depend on the recycling of wastes into new products. Geopolymers gained increasing attention because of their eco-friendly and superior mechanical characteristics and their ability to utilize numerous wastes as precursors. Although there are numerous studies on geopolymer, little attention was focused on geopolymer concrete (GeoC). Hence, This review follows the Preferred Reporting Items for Systematic Reviews (PRISMA) investigated in detail GeoC. The first part of this study explores the recent synthesis processes, different precursors, and applications of geopolymer concrete (GeoC) in numerous sectors as well as the mechanical, microstructural, and physical related characteristics of GeoC developed from various wastes. The second part discusses in detail the contributions of GeoC to the sustainable development goals (SDGs) stated by the United Nations. The last part discusses the implementation of different wastes to develop GeoC-based circular economy to provide recommendations and prospects for GeoC science and technology. An eco-friendly, sustainable, structurally sound GeoC matrixes can be developed from numerous industrial, municipal, and agricultural wastes. Such GeoC is a good candidate to traditional concrete and some other building materials. GeoC is strongly contribute into 12 SDGs of the main 17 SDGs. Optimizing the elements of GeoC would decrease its cost and thus promote a green circular economy.

New insights into the selective adsorption mechanism of cationic and anionic dyes using MIL-101(Fe) metal-organic framework: Modeling and interpretation of physicochemical parameters.

In the current study, iron-based metal organic framework (MOF) MIL-101(Fe) was successfully prepared via a facile solvothermal method. The as-synthesized MIL-101(Fe) was characterized by XRD, FE-SEM, FTIR, TGA and zeta potential techniques, and then employed as an adsorbent for methyl orange (MO) and methylene blue (MB) dyes. The adsorbed quantities of MO (1067 to 831 mg/g) were higher than those of MB (402 to 353 mg/g) indicating the high selectivity of MIL-101(Fe) towards the anionic dye at all temperatures (20-60 °C). Adsorption processes of MO and MB followed the pseudo-second order kinetics and the Langmuir equilibrium model. The interaction mechanism at a molecular level was analyzed and deeply interpreted via the advanced multilayer adsorption model. Steric parameters indicated that MO molecular aggregation (n) was 0.95-1.33 thus signifying the presence of multi-docking and multi-interactions mechanisms. The aggregated number of MB was superior to unity (i.e., n = 1.17-1.78) suggesting a vertical adsorption position and a multi-interactions mechanism at all operating temperatures. The density of MIL-101(Fe) active sites (DM = 77.33-52.38 mg/g for MB and 149.91-107.07 for MO) and the total adsorbed dye layers (Nt = 3.12-2.49 for MB and 5.36-3.67 for MO) resulted in improving the adsorption capacities of MO dye. The adsorption energies ranged from 8.89 to 33.73 kJ/mol and they displayed that MO and MB uptake processes were exothermic controlled by physical interactions at all temperatures. Regeneration results indicated that this adsorbent can be reutilized without a significant loss in its removal efficiency after five adsorption-desorption cycles. Overall, the adsorption capacity, chemical stability, and regeneration performance of MIL-101(Fe) support its application as a very promising adsorbent for the removal of organic hazardous pollutants from water.

LDH Nanocubes Synthesized with Zeolite Templates and Their High Performance as Adsorbents.

In this work, the efficiency of the adsorptive removal of the organic cationic dye methylene blue (MB) from polluted water was examined using three materials: natural clay (zeolite), Zn-Fe layered double hydroxide (LDH), and zeolite/LDH composite. These materials were characterized via X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, high-resolution transmission electron microscopy (HRTEM), energy dispersive X-ray (EDX) diffraction (XRF), low-temperature N2 adsorption, pore volume and average pore size distribution and field emission scanning electron microscopy (FE-SEM). The properties of the applied nanomaterials regarding the adsorption of MB were investigated by determining various experimental parameters, such as the contact time, initial dye concentration, and solution pH. In addition, the adsorption isotherm model was estimated using the Langmuir, Freundlich, and Langmuir-Freundlich isotherm models. The Langmuir model was the best-fitting for all applied nanomaterials. In addition, the kinetics were analyzed by using pseudo-first-order, pseudo-second-order, and intraparticle diffusion models, and the pseudo-second-order model was an apparent fit for all three applied nanomaterials. The maximum Adsorption capacity toward MB obtained from the materials was in the order zeolite/LDH composite > zeolites > Zn-Fe LDH. Thus, the zeolite/LDH composite is an excellent adsorbent for the removal of MB from polluted water.

Removal of Cu2+ metal ions from water using Mg-Fe layered double hydroxide and Mg-Fe LDH/5-(3-nitrophenyllazo)-6-aminouracil nanocomposite for enhancing adsorption properties.

Herein, a new adsorbent was prepared by modifying Mg-Fe LDH for the removal of Cu2+ metal ions from wastewater. Mg-Fe LDH with 5-(3-nitrophenyllazo)-6-aminouracil ligand has been successfully prepared using direct co-precipitation methods and was fully characterized using FTIR analysis, X-ray diffraction, BET surface area theory, zeta potential, partial size, TGA/DTA, CHN, EDX, FESEM, and HRTEM. The surface areas of Mg-Fe LDH and Mg-Fe LDH/ligand were 73.9 m2/g and 34.7 m2/g respectively. Moreover, Cu2+ adsorption on LDH surfaces was intensively examined by adjusting different parameters like time, adsorbent dosage, pH, and Cu2+ metal ion concentration. Several isotherm and kinetic models were investigated to understand the mechanism of adsorption towards Cu2+ metal ions. Adsorption capacity values of LDH and ligand-LDH rounded about 165 and 425 mg/g respectively, applying nonlinear fitting of Freundlich and Langmuir isotherm equations showing that the ligand-LDH can be considered a potential material to produce efficient adsorbent for removal of heavy metal from polluted water. The adsorption of Cu2+ metal ions followed a mixed 1,2-order mechanism. The isoelectric point (PZC) of the prepared sample was investigated and discussed. The effect of coexisting cations on the removal efficiency of Cu2+ ions shows a minor decrease in the adsorption efficiency. Recyclability and chemical stability of these adsorbents show that using Mg-Fe LDH/ligand has an efficiency removal for Cu2+ ions higher than Mg-Fe LDH through seven adsorption/desorption cycles. Moreover, the recycling of the Cu2+ ions was tested using cyclic voltammetry technique from a neutral medium, and the Cu2+ ion recovery was 68%.

Recent progress in environmentally friendly geopolymers: A review.

The manufacturing of cement demand burning of huge quantities of fuel as well as significant emissions of CO2 resulting from the decomposition of limestone that consequently resulted in severe environmental impact that is estimated by one ton of CO2 per ton of cement. Geopolymerization technology is an effective method for converting wastes (containing alumina and silica) into useful products. It can reduce CO2 emissions significantly from the cement industry. The geopolymerization process usually starts with source materials based on alumina/silicate in addition to alkaline liquids. The compressive strength, setting time, and workability of the final product depends mainly on the type and proportions of the precursors, the type and strength of the activator, the mixing and curing conditions. The structural performance of a geopolymer is similar to that of ordinary Portland cement (OPC). Therefore, geopolymer can replace OPC, and thus decreasing the energy consumption, reducing the cost of the building materials, and minimizing the environmental impacts of the cement industry. This review summaries the mechanism of geopolymerization, including the controlling parameters and different raw materials (fly ash, kaolinite and metakaolin, slag, red mud, silica waste, heavy metals waste, and others) with particular focus on recent studies and challenges in this area.

Recent progress in environmentally friendly bio-electrochemical devices for simultaneous water desalination and wastewater treatment.

Bio-electrochemical systems (BESs) use electroactive micro-organisms for degrading organic materials in wastes for energy and/or chemical production. Microbial based desalination system is a cost-effective and environmentally friendly technique that can be used for water desalination with simultaneous wastewater treatment and energy harvesting. These systems can be used as a standalone technology for water desalination such as microbial desalination cell, microbial electrolysis desalination cell, or a hybrid with other desalination technology. This review summarized the recent progress in using BESs for water desalination, including microbial fuel cell-based desalination (MDC) and microbial electrolysis cell-based desalination (MEDC). The different scaling up trials to commercialize this technology, including the controlling parameters, are discussed. Moreover, the different hybrid desalination systems based on BES are summarized. Finally, the challenges facing the commercialization of the MDC systems were summarized.